Hunter HEPAtech Ultra Quiet Air Purifier
For Rooms Up To 12' X 13'/156 Sq. ft.
SKU: 982210
Clean Air Delivery Rate Certified Rating
AHAM Certified
From air cleaner to air cleaner, compare the CADR numbers. First, look at suggested room size. Then refer to the tobacco smoke, dust, and pollen Clean Air Delivery Rate (CADR) numbers. The higher the numbers, the faster the unit filters the air.
This air cleaner is suggested for use in a single closed room up to 156 square feet.
Room size ratings conform to the AHAM Certification Program criteria of 80% smoke reduction. Higher Clean Air Delivery Rates provide improved performance in all room sizes. Portable air cleaners will be much more effective in rooms where all doors and windows are closed.
Tobacco smoke: 101
Dust: 120
Pollen: 120
These values represent performance that can be expected within the first 72 hours of operation. Subsequent performance may vary with use.
Important Safety Instructions
Read all instructions before using this Air Purifier and save these important instructions.
- This Air Purifier is designed for use on a flat, level surface and may not work properly on an uneven surface. Always place this Air Purifier on a firm, level surface. Always place the Air Purifier at least six inches away from walls and heat sources such as stoves, radiators, and heaters.
- Place the Air Purifier in an area that is out of the reach of children.
- Before using the Air Purifier, extend the cord and inspect for any signs of damage. Do not use the product if the cord has been damaged.
- This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat or override this safety feature.
- Always unplug the Air Purifier when it is not in operation, while the filter is being changed, and while it is being cleaned.
- Do not tilt or move the Air Purifier while it is in operation. Shut off and unplug before moving.
- Do not immerse the Air Purifier in water as permanent damage will occur. Refer to and follow the Cleaning and Filter Replacement instructions.
Introduction
Thank you for purchasing the HEPAtech Air Purification System from Hunter Fan Company. You have purchased the latest development in portable Air Purification Systems. This system has been developed to improve the quality of the air you breathe.
Your HEPAtech Air Purification System outperforms other air purification systems by removing dust, smoke, and pollen particles as small as 0.1 microns in size. Room air is pulled in through the front grill and cleaned across the activated carbon pre-filter and the HEPAtech system filter. Clean air is then released out the top grill in order to avoid stirring up settled particles.
Using the Ionizer
Using the ionizer improves the quality of air in the room. Negative ions are released into the air, and positively charged particles cling to the negative ions. These particles settle out of the air and can be vacuumed up during normal cleaning. These particles are also more easily trapped in the HEPAtech system filter as they pass through the HEPAtech Air Purification System. To ensure the best air circulation in the room, Hunter Fan recommends that you place your air purifier six inches away from any walls.
Using Your Air Purifier
- Remove your air purifier from the box and take it out of the clean plastic protective bag.
- Place your HEPAtech Air Purification System on a hard, flat surface.
- Before turning the Air Purifier on, you need to open the front grill.
For Models 30057 and 30251: To release the front grill, place your fingers behind the tabs and pull forward.
For Models 30067 and 30124: To release the front grill, press the buttons on the side until the front grill slides easily over the buttons. - The filter comes to you installed in the correct position. Grasp the filter, and pull it forward. Remove the plastic wrapping and replace the filter in the unit. The white filter material should be facing outward (towards you) and the wire mesh side should be hidden from view (inside the unit).
- Replace the front grill. Be sure that the bottom tabs are in location first, and then push the top of the grill forward until is it closed. The unit is now ready for normal operation. Note: This unit will not operate unless the door is placed in the correct position.
- Plug the unit into a 120V electrical outlet.
Operating Your Air Purifier
Ionizer: Press this button to turn on the ionizer. When the ionizer is on, the green light near the button will be illuminated.
On/Speed Control: Rotate the Speed Control knob to set the desired speed. A setting of zero indicates that the unit is off, one is low speed, two is medium speed, and three is high speed. The fan speed can be adjusted at any time.
Filter Change Calendar
The filter counter is designed to optimize the performance of the air purifier by reminding you when to change the HEPAtech Filter and pre-filter.
HEPAtech Filter Calendar: The HEPAtech Filter indicator is located at the top of the calendar ring. To set the HEPAtech Filter counter, rotate the calendar ring to align the month that you installed the filter with the top indicator. Since the filter is designed for six months usage, the two indicators will serve as reminders to change the filter every six months.
Pre-Filter Calendar: The inner knob of the filter counter is the pre-filter counter. To use, align the knob with the month that you installed the pre-filter. The replace symbol on the inner knob points to the month in which you should install a new pre-filter. The pre-filter is designed for three months of usage.
Read and follow all manufacturer instructions, warnings, directions, and precautions included with and on product.